This graph shows which files directly or indirectly include this file:
Go to the source code of this file.
Macros | |
| #define | OPGP_ERROR_SUCCESS 0 |
| No error occurred. | |
| #define | OPGP_ERROR_UNRECOGNIZED_APDU_COMMAND ((DWORD)0x80301000L) |
| A APDU command can't be recognized as a valid T=0 protocol Case 1-4 ISO7816-4 APDU. | |
| #define | OPGP_ERROR_CARD_CRYPTOGRAM_VERIFICATION ((DWORD)0x80302000L) |
| The verification of the card cryptogram failed. | |
| #define | OPGP_ERROR_COMMAND_SECURE_MESSAGING_TOO_LARGE ((DWORD)0x80303000L) |
| The command data is too large for secure messaging. | |
| #define | OPGP_ERROR_COMMAND_TOO_LARGE ((DWORD)0x80303001L) |
| The command data is too large. | |
| #define | OPGP_ERROR_INSUFFICIENT_BUFFER ((DWORD)0x80304000L) |
| A used buffer is too small. | |
| #define | OPGP_ERROR_WRONG_TRY_LIMIT ((DWORD)0x80306000L) |
| Wrong maximum try limit. | |
| #define | OPGP_ERROR_WRONG_PIN_LENGTH ((DWORD)0x80307000L) |
| Wrong PIN length. | |
| #define | OPGP_ERROR_WRONG_KEY_VERSION ((DWORD)0x80308000L) |
| Wrong key version. | |
| #define | OPGP_ERROR_WRONG_KEY_INDEX ((DWORD)0x80309000L) |
| Wrong key index. | |
| #define | OPGP_ERROR_WRONG_KEY_TYPE ((DWORD)0x8030A000L) |
| Wrong key type. | |
| #define | OPGP_ERROR_KEY_CHECK_VALUE ((DWORD)0x8030B000L) |
| Key check value reported does not match. | |
| #define | OPGP_ERROR_INVALID_COMBINATION_KEY_SET_VERSION_KEY_INDEX ((DWORD)0x8030C000L) |
| The combination of key set version and key index is invalid. | |
| #define | OPGP_ERROR_MORE_KEY_INFORMATION_TEMPLATES ((DWORD)0x8030D000L) |
| More key information templates are available. | |
| #define | OPGP_ERROR_APPLICATION_TOO_BIG ((DWORD)0x8030E000L) |
| The application to load must be less than 32535 bytes. | |
| #define | OPGP_ERROR_VALIDATION_FAILED ((DWORD)0x8030F000L) |
| A validation has failed. | |
| #define | OPGP_ERROR_INVALID_FILENAME ((DWORD)0x8030F001L) |
| A file name is invalid. | |
| #define | OPGP_ERROR_INVALID_PASSWORD ((DWORD)0x8030F002L) |
| A password is invalid. | |
| #define | OPGP_ERROR_WRONG_EXPONENT ((DWORD)0x8030F003L) |
| The exponent must be 3 or 65537. | |
| #define | OPGP_ERROR_INVALID_LOAD_FILE ((DWORD)0x8030F008L) |
| The load file has an invalid structure. | |
| #define | OPGP_ERROR_CAP_UNZIP ((DWORD)0x8030F009L) |
| The CAP file cannot be unzipped. | |
| #define | OPGP_ERROR_INVALID_RESPONSE_DATA ((DWORD)0x8030F00BL) |
| The response of the command was invalid. | |
| #define | OPGP_ERROR_CRYPT ((DWORD)0x8030F00CL) |
| An encryption or decryption error occurred. | |
| #define | OPGP_ERROR_SCP03_SECURITY_R_ENCRYPTION_R_MAC_NOT_SUPPORTED ((DWORD)0x8030F00EL) |
| SCP03 with R-Encryption and R-MAC is not supported. | |
| #define | OP201_ERROR_LOAD_FILE_DAP_NULL ((DWORD)0x8030F007L) |
The Load File DAP is NULL. | |
| #define | OP201_ERROR_MORE_APPLICATION_DATA ((DWORD)0x80305001L) |
| More Card Manager, Executable Load File or application data is available. | |
| #define | GP211_ERROR_MORE_APPLICATION_DATA ((DWORD)0x80305000L) |
| More Issuer Security Domain, Executable Load File, Executable Load Files and Executable Modules or application data is available. | |
| #define | GP211_ERROR_LOAD_FILE_DATA_BLOCK_HASH_NULL ((DWORD)0x8030F004L) |
The Load File Data Block Hash is NULL. | |
| #define | GP211_ERROR_INVALID_SCP ((DWORD)0x8030F005L) |
| The Secure Channel Protocol is invalid. | |
| #define | GP211_ERROR_INVALID_SCP_IMPL ((DWORD)0x8030F006L) |
| The Secure Channel Protocol Implementation is invalid. | |
| #define | GP211_ERROR_VALIDATION_R_MAC ((DWORD)0x8030F007L) |
| The validation of the R-MAC has failed. | |
| #define | GP211_ERROR_INCONSISTENT_SCP ((DWORD)0x8030F00AL) |
| The Secure Channel Protocol passed and the one reported by the card do not match. | |
| #define | GP211_ERROR_INCORRECT_CARD_CHALLENGE ((DWORD)0x8030F00DL) |
| The calculated pseudo random card challenge from the card does not match. | |
| #define | GP211_ERROR_INCONSISTENT_SCP_IMPL ((DWORD)0x8030F00CL) |
| The Secure Channel Protocol Implementation passed and the one reported by the card do not match. | |
| #define | OPGP_ISO7816_ERROR_PREFIX ((DWORD)0x80200000L) |
| Error prefix for all ISO7816 errors. | |
| #define | OPGP_ISO7816_ERROR_SUCCESS (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x9000L) |
| Success. No error. | |
| #define | OPGP_ISO7816_ERROR_RESPONSE_LENGTH (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6100L) |
| Response bytes available indicated the last 2 Bytes. | |
| #define | OPGP_ISO7816_ERROR_FILE_INVALIDATED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6283L) |
| Selected file invalidated. | |
| #define | OPGP_ISO7816_WARNING_CM_LOCKED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16283L) |
| Card life cycle is CM_LOCKED. | |
| #define | OPGP_ISO7816_ERROR_FILE_TERMINATED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6285L) |
| SELECT FILE Warning: selected file is terminated. | |
| #define | OPGP_ISO7816_ERROR_6300 (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6300L) |
| No information given. | |
| #define | OPGP_ISO7816_ERROR_HOST_CRYPTOGRAM_VERIFICATION (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16300L) |
| Authentication of host cryptogram failed. | |
| #define | OPGP_ISO7816_ERROR_MORE_DATA_AVAILABLE (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6310L) |
| More data available. | |
| #define | OPGP_ISO7816_ERROR_NOTHING_SPECIFIC (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6400L) |
| No specific diagnosis. | |
| #define | OPGP_ISO7816_ERROR_MEMORY_FAILURE (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6581L) |
| Memory failure or EDC check failed. | |
| #define | OPGP_ISO7816_ERROR_WRONG_LENGTH (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6700L) |
| Wrong length. | |
| #define | OPGP_ISO7816_ERROR_CHANNEL_NOT_SUPPORTED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6881L) |
| Function not supported - Logical channel not supported/open. | |
| #define | OPGP_ISO7816_ERROR_SECURE_MESSAGING_NOT_SUPPORTED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6882L) |
| Function not supported - Secure messaging not supported. | |
| #define | OPGP_ISO7816_ERROR_CONDITIONS_NOT_SATISFIED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6985L) |
| Command not allowed - Conditions of use not satisfied. | |
| #define | OPGP_ISO7816_ERROR_NOT_MULTI_SELECTABLE (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16985L) |
| The application to be selected is not multi-selectable, but its context is already active. | |
| #define | OPGP_ISO7816_ERROR_SECURITY_STATUS_NOT_SATISFIED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6982L) |
| Command not allowed - Security status not satisfied. | |
| #define | OPGP_ISO7816_ERROR_6999 (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6999L) |
| #define | OPGP_ISO7816_ERROR_SELECTION_REJECTED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16999L) |
| The application to be selected rejects selection or throws an exception. | |
| #define | OPGP_ISO7816_ERROR_WRONG_DATA (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6A80L) |
| Wrong data / Incorrect values in command data. | |
| #define | OPGP_ISO7816_ERROR_WRONG_GLOBAL_PIN_FORMAT (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16A80L) |
| Wrong format for global PIN. | |
| #define | OPGP_ISO7816_ERROR_FUNC_NOT_SUPPORTED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6A81L) |
| Function not supported. | |
| #define | OPGP_ISO7816_ERROR_APPLET_NOT_SELECTABLE (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16A81L) |
| Card is locked or selected application was not in a selectable state. | |
| #define | OPGP_ISO7816_ERROR_FILE_NOT_FOUND (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6A82L) |
| File not found. | |
| #define | OPGP_ISO7816_ERROR_APPLET_NOT_FOUND (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16A82L) |
| The application to be selected could not be found. | |
| #define | OPGP_ISO7816_ERROR_NOT_ENOUGH_MEMORY (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6A84L) |
| Not enough memory space. | |
| #define | OPGP_ISO7816_ERROR_INCORRECT_P1P2 (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6A86L) |
| Incorrect parameters (P1, P2). | |
| #define | OPGP_ISO7816_ERROR_WRONG_PIN_TRY_LIMIT (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x16A86L) |
| Wrong parameter P2 (PIN try limit). | |
| #define | OPGP_ISO7816_ERROR_DATA_NOT_FOUND (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6A88L) |
| Referenced data not found. | |
| #define | OPGP_ISO7816_ERROR_WRONG_P1P2 (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6B00L) |
| Wrong parameters (P1, P2). | |
| #define | OPGP_ISO7816_ERROR_CORRECT_LENGTH (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6C00L) |
| Correct expected length (Le) indicated by last 2 Bytes. | |
| #define | OPGP_ISO7816_ERROR_INVALID_INS (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6D00L) |
| Invalid instruction byte / Command not supported or invalid. | |
| #define | OPGP_ISO7816_ERROR_WRONG_CLA (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6E00L) |
| Wrong CLA byte. | |
| #define | OPGP_ISO7816_ERROR_ILLEGAL_PARAMETER (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x6F74L) |
| Illegal parameter. | |
| #define | OPGP_ISO7816_ERROR_ALGORITHM_NOT_SUPPORTED (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x9484L) |
| Algorithm not supported. | |
| #define | OPGP_ISO7816_ERROR_INVALID_KEY_CHECK_VALUE (OPGP_ISO7816_ERROR_PREFIX | (DWORD)0x9485L) |
| Invalid key check value. | |
Detailed Description
This file contains all GlobalPlatform error codes.
